Filter Cartridges

Our wide selection of different types of filter cartridges offers you the greatest possible flexibility. FTJ filter cartridges have maximum dirt holding capacity and are suitable for large volume flows as well as complex filtration processes.

PP wound filter cartridges

Wound filter-cartridges Type: PP, PPW (washed)

Wound filter-cartridges are depth-filter-elements, produced in a special way of winding. Newest winding-machines guarantee a constant and high quality for filter-cartridges up to 60”.

The PPW filter-element is wound with a special washed yarn. Washed yarn is free of wetting agents and prevents foaming.

Applications: Packing unit:
Galvanic baths 9 ¾“ – 10“ = 1 PU 60 piece
Film-developing 19 ½“ – 30“ = 1 PU 30 piece
Process water 40“ = 1 PU 15 piece
Wastewater, etc.

 

Media:Polypropylene (washed), Polyester, Nylon, Glass fibre, Cotton
Core:Polypropylene, Stainless Steel (304), Galvanised steel
Operating temperature:Max. 80° C, Steel core/other yarns: 160°C – 400°C
Outside diameter:62 mm or 114 mm
Inside diameter:27 mm
Starting ΔP:0.1 bar
Max. ΔP:2.5 bar
Length (inch):
51019½2029¼30394060
Length (mm):12724825449550874476299210161524
Micron rating ((µm):13510255075100150200
Flow rare: l/min./ 10“:7132125303535353535

 

NT Filter Cartridges

Nominal rated filter cartridges melt blown Type: NT

  • Thermally bonded microfibers made of pure polypropylene
  • Free of wetting agents
  • Depth-filters for the filtration of drinking water, galvanic baths,
    chemicals, cooling lubricants and emulsions.
  • Complies with FDA regulations.

 

Material:Pure Polypropylene free of tensides
Outside diameter63 mm or 114 mm
Inside diameter:
27.5 mm
Length (inch):
1019½2029¼30394045 
Length (mm):24825449550874376299110161143 
           
Micron rating (µm):0.81351020305075 
Flow rate:/l/min./10”579151820222525 
 
Operating temperature:80° C
Starting ΔP:0.05 bar
Max. ΔP:2.0 bar
           
Adapter:DOE, P3, P7, P8
           
Packing unit:  9 ¾“ – 10“ = 1 PU 40 pieces     
 19 ½“ – 40“ = 1 PU 20 pieces     

 

AT Filter Cartridges

Absolute rated filter cartridges Type: AT

Material:100% pure polypropylene (melt blown), without binding agents, PP core
Seal media:FPM, NBR, EPDM, Silicone
Outside diameter:64 mm
Inside diameter:27 mm
Length (inch):10203040       
Length (mm):2545087621016       
Operating temperature:80° C (max. 121° C for sterilisation)
Micron rating (µm):
0.5135102030507590120
Flow rate: m³/h/10“:0.91.01.11.41.62.02.63.03.03.03.0
 
Starting ΔP:0.1 bar - 1.0 bar
            
Version:DOE with foamed flat gaskets G   
 SOE 226 – O-rings / bayonet / spear P7   
 SOE 222 – O-rings / flat   P3   
 SOE 222 – O-rings / spear   P8   
            
Packing unit:  9 ¾“ – 10“ = 1 PU 40 pieces      
 19 ½“ – 40“ = 1 PU 20 pieces      

 

AT Genius

Absolute rated filter cartridges Type: AT Genius / CLA Genius-FTJ   

Material:100 % pure polypropylene (microfibers)
Construction:DOE, without support core
Operating temperature:80° C   
Micron rating (µm):151020407090
Flow rate: m³/h/ 10"15233037404040
 
Starting ΔP:0.15 bar
Max. ΔP:4 bar   

 

ATN Filter Cartridges

Absolute rated filter cartridges Type: ATN                                  

Material:100% pure polyamide (Nylon), without binding agents, PA core
Seal media:FPM, NBR, EPDM, Silicone
Outside diameter:64 mm
Inside diameter:27 mm
Length (inch):10203040      
Length (mm):2545087621016      
Operating temperature:max. 150° C with max. 3.0 bar
Separation rate 99,00 % (µm)1 3 7 14 20 30 50 70 90 150
Separation rate 99,98 % (µm)3 5 10 20 30 40 70 90 120 200
Flow rate: m³/h / 10”1.11.41.62.02.53.03.03.03.03.0
Starting ΔP:0.1 bar - 1.0 bar
           
Version:DOE with foamed flat gaskets G  
 SOE 226 – O-rings / bayonets / spear P7  
 SOE 222 – O-rings / flatP3  
 SOE 222 – O-rings / spearP8  
           
Packing unit:   9 ¾“ – 10“ = 1 PU 40 pieces     
 19 ½“ – 40“ = 1 PU 20 pieces     

 

PPA Filter Cartridges

Pleated Filter Cartridge Type: PPA

  • Pleated PP-Membrane or nonwoven

  • PP support nonwoven

  • Hard cage

  • Core + end caps made of 100 % polypropylene, meet requirements of FDA guidelines.

  • Thermal welding processes seal all components

  • No adhesives or extractable materials

Version:

  • DOE
  • SOE 226 – O-Ring / Bayonet / Spear P7
  • SOE 222 – O-Ring / Flat P3
  • SOE 222 – O-Ring / Spear P8

 

Filter surface:
0.4 – 0.6 m²
Deposition rate:99.99 % Beta ratio 5000
Seals:Buna, EPDM, Viton, Silicone

Outside diameter / Inside Diameter:

66 mm/27 mm
Length in mm/ inch:248/9 ¾254/10508/20762/301016/40    
Operating temperature80° C
Sterilisation:Applies to single open end cartridges only. For all steaming and hot water applications, the glass filled end cap option must be used (only PP). 
 ein Edelstahlinsert oder die glasfaserverstärkte Version benutzt werden (nur PP).
Steam: 121° C  for 15 min. (20 cycles)
Hot water:
90° C   for 30 min. (0.2 barΔPmax.)
Micron rating ( µm):0.20.5135102035507090

Flow rate in L/min per 10“
(Referring to all micron ratings):

Start.-diff.-pressure 0,03 bar:515203535404040404040
Start.-diff.-pressure 0,01 bar:2571520354040404040
Max. diff.-pressure at 80°C:0.5 bar

 

Activated Carbon Filter Cartridges

Activated Carbon Filter Cartridges

  • Pressed and extruded micro activated carbon core
  • Prevent the release of carbon particles into the filtrate
  • Excellent adsorption characteristics for chlorine and organic compounds

Type AKG G

Outside Diameter
65 mm
Inside Diameter
27 mm
Length in inch:
5“9¾“10“20“30“
Length in mm:127248254508762
Filter fineness (µm):5, 10
Max. operating temperature:52° C
Max. flow rate8 l/min. per 10“ length
Max. differential pressure:2.5 bar
Activated carbon part5“95 g   
 9¾“ + 10“190 g   
 20“380 g   
 30“570 g   

Version:                           Polypropylene yarn, washed

 

Type AKV

Outside Diameter
71 mm
Inside Diameter
27 mm
Length in inch:
4 7/8“9¾“20“30“ 
Length in mm:124248508762 
Filter fineness (µm):1, 5, 10
Max. operating temperature:52° C
Max. flow rate8 l/min. per 10“ length
Max. differential pressure:7 bar
Activated carbon part4 7/8“180 g   
 9¾“360 g   
 20“720 g   
 30“1080 g   

Version:                          Polypropylene fleece and polypropylene mesh

Metal mesh filter cartridge

Stainless steel cartridge Type: MG

Material:AISI 304 (stainless steel mesh and perforated metal plate support core)
Outside Diameter
65 mm
Length in inch:5“ to 40“
Fineness:3 µm to 1000 µm
Operating temperature:max. 300° C
Start.- diff.- pressure:0.1 bar
Max. diff.- Pressure:2.5 bar
     
Version:DOE (double open end)  
 SOE with adapter and radial seal

 

Brochure Filter Cartridges

Further information about our Filter Cartridges is provided in this brochure.